Wine & Spirits Bottle Box
A two-piece rigid box built around a bottle rather than a shelf: a tall friction-fit lid and base with a cradle insert that grips the shoulder and the base of the bottle.
- MOQ100 pcs
- Indicative @500 pcs$1.20 – 1.80
Wine & spirits packaging · MOQ 100 pcs on rigid structures
The bottle is the problem
A bottle box is a weight problem wearing a design problem's clothes. A rigid single-bottle box runs $1.20 – 1.80 per piece at 500 pcs and the same box with a shaped insert runs $1.50 – 2.30, and the difference is what stops the glass moving. Filled weight and shoulder diameter decide the structure; height decides almost nothing.
Range
One bottle, two bottles, or a case
These are three different engineering problems quoted from the same price list. A single bottle needs a cradle that grips the shoulder; two bottles need those cradles not to touch each other; a case needs the retail boxes not to move inside the shipper. The structure changes, the board usually does not.
Magnetic Box with Foam Insert Tray
The magnetic shell from our standard rigid range, with an insert die-cut to the product's own outline so nothing moves in transit and everything sits at the height you want it seen.
- MOQ100 pcs
- Indicative @500 pcs$1.50 – 2.30
Lid & Base Rigid Box
Two rigid pieces — a base tray and a lid that sits over it with a friction fit.
- MOQ100 pcs
- Indicative @500 pcs$1.20 – 1.80
Foldable Magnetic Gift Box
The same rigid magnetic shell with a folding wall and a locking base, so the box travels flat and snaps up for packing.
- MOQ100 pcs
- Indicative @500 pcs$1.50 – 2.30
Luxury Ribbon-Handle Paper Bag
Printed art paper with a matte or soft-touch lamination, a folded and glued top edge, a board base and a ribbon handle threaded through a reinforced panel.
- MOQ300 pcs
- Indicative @500 pcs$0.43 – 0.73
Rope-Handle Paper Bag
Cotton rope through a folded and glued top edge, set into a printed paper body with a board base.
- MOQ300 pcs
- Indicative @500 pcs$0.43 – 0.73
What this industry actually needs
The bottle is the problem
A wine box is usually described as a design job and is actually a weight and movement job. Everything that fails in transit fails because the glass moved, and glass moves because the box was specified from a photograph instead of from the bottle.
1. Ask for the filled weight
An empty 750 ml bottle weighs a few hundred grams; filled it is well over a kilogram, and a magnum is roughly double that again. The structure follows the filled weight and the diameter at the shoulder and base — not the height. Every quotation we give starts from those numbers, and a quote given without them is a guess.
2. Bottles must not touch each other
Single-bottle logic breaks the moment a second bottle enters the box. Two cradles sitting side by side still let glass contact glass, and that is the failure no board grade can absorb. A divider is what makes a two- or three-bottle set work, and it is quoted separately because it is assembled by hand.
3. Leave room for the mandatory panels
Markets differ on what a bottle or its packaging must carry, and that is your regulatory team's call, not ours. What we can do is structure the box so there is somewhere to put it: a printed sleeve or a base panel costs far less than reshaping a lid to create a flat face you did not plan for.
| How the bottle is held | Indicative | When it is the right answer |
|---|---|---|
| Die-cut board collar | Included in the box price | The entry answer for a single bottle. Constrains the body but not the neck, so it suits a short, stable bottle rather than a tall taper. |
| Moulded pulp bottle cradle | Quoted as its own line | Shaped to the shoulder and the base. The usual answer for anything tall, tapered or heavy, and the one that stops the movement that actually breaks bottles. |
| Foam or EVA insert | Quoted as its own line | Precise, presentation-grade, and the most expensive of the three. Priced by cavity count and cut, so it scales with how many bottles share the box, not with box size. |
| Divider grid | Quoted as its own line | What makes a two- or three-bottle box work. Without it the bottles touch, and glass-to-glass contact is the failure mode no amount of board thickness fixes. |
Pricing
Indicative pricing for this range
The ranges below show what each specification lands in at each quantity tier. Your quote will be itemised against your own size, board or fabric, finishes and insert.
| Line | Quantity | Indicative ex-works | Assumed specification |
|---|---|---|---|
| Wine & spirits bottle box | 100 pcs | $1.20 – 1.80 @500 pcs | Rigid single-bottle box with a collar or cradle |
| Bottle box with foam insert | 100 pcs | $1.50 – 2.30 @500 pcs | Presentation-grade shaped insert; the premium single-bottle tier |
| Lid & base rigid box | 100 pcs | $1.20 – 1.80 @500 pcs | Friction-fit lid; the cost-optimised rigid structure |
| Foldable magnetic box | 100 pcs | $1.50 – 2.30 @500 pcs | Same rigid shell, ships flat; freight volume close to zero |
| Ribbon-handle paper bag | 300 pcs | $0.43 – 0.73 @500 pcs | Load-tested base; the hand-over carrier for a bottle |
| Rope-handle paper bag | 300 pcs | $0.43 – 0.73 @500 pcs | Heavier handle for two-bottle sets; same band as ribbon |
| Divider grid or pulp tray | 100 pcs | Quoted as its own line | What separates bottles; priced by cavity count, hand-assembled |
| Foil, emboss or spot UV | 100 pcs | Quoted as its own line | Priced by stamped area. Often paired with a debossed crest on dark board |
Free quote
Start your quote
Send the basics and you will get an itemised price plus a 3D mockup with your branding.
What you get
Quoted line by line, not as a lump sum
- ✓Structural dieline (PDF) and a 3D mockup with your artwork
- ✓Board or fabric, printing, each finish and the insert priced separately
- ✓A physical sample before any bulk run, credited on your order
- ✓Photo and video updates every two days through production
- ✓Freight quoted for your route — sea, air or express
Reply within one business day. No obligation, and no design files needed to start.
Wine & spirits packaging FAQ
Before you brief a bottle box
Bottle weight, shoulder breakage, dividers and where mandatory panels go — what actually decides a bottle box order.
Where do bottles actually break in transit?
In our experience the shoulder and the neck, not the base — and the cause is movement rather than impact. A bottle that can shift inside its box builds momentum, and the narrowest part of the glass is where that energy arrives. That is why a cradle shaped to the shoulder matters more than a thicker board, and why we ask for the bottle's filled weight and its diameter at the shoulder and at the base, not just its height. If you have breakage numbers from a current pack, those are more useful than any description.
Two bottles in one box — what changes?
A divider, and it is not optional. Two cradles that sit side by side will let the bottles touch unless something separates them, and glass on glass is the one failure the board cannot absorb. The divider is quoted as its own line because it is hand-assembled and scales with the bottle count. For three or more bottles the same logic holds, and at some point a moulded pulp tray with the cavities formed in one piece becomes both safer and cheaper than an assembled grid.
Does the box have to carry mandatory information?
That depends entirely on the market you are selling into, and it is a question for your regulatory team rather than for us — we will not guess at it. What we can tell you is what it costs in structure. A box that has to carry a large block of text, a duty stamp or a barcode needs a flat, unbroken panel to put it on, which usually means a printed sleeve or a base panel rather than the lid. Raise it before the die is cut: adding a printed panel later is straightforward, reshaping a box to create one is not.
We are selling the box as the gift. What should we add?
A carrier, and it should be specified with the box rather than after. A bottle box handed over without a bag is a box the customer carries awkwardly; a ribbon-handle paper bag at $0.43–0.73 per piece at 500 pcs is load-tested for the weight and costs a fraction of the box. For a set presented as a gift, box plus bag plus a printed sleeve is the usual combination, and quoting all three at once is cheaper than adding them one at a time.
Keep reading
Related guides and products
Rigid gift boxes
Magnetic, drawer and lid & base shells, including the bottle box range.
Paper gift bags
Ribbon-handle and rope-handle carriers load-tested for bottle weight.
Corrugated mailers
The shipper that carries the presentation box without letting it move.
Get a free quote
Send your spec. Get a number in 24 hours.
Tell us the product, the quantity and the destination. You will get an itemised factory-direct price, a recommended structure and a 3D mockup — no design files needed to start.
- ✓Itemised pricing, not a single lump sum
- ✓Structural dieline and 3D mockup included
- ✓Physical sample before any bulk run
- ✓Photo and video updates through production
Free quote
Free quote in 24 hours
Two minutes to fill in. No design files needed to start.